Добро пожаловать на Porsche Club Russland - Официальный Порше клуб России - Форум Порше.
Если это ваш первый визит, рекомендуем почитать справку по форуму. Для размещения своих сообщений необходимо зарегистрироваться. Для просмотра сообщений выберите раздел.
Вернуться   Porsche Club Russland - Официальный Порше клуб России - Форум Порше > Porsche > Обслуживание и ремонт
Ответ
 
Опции темы Опции просмотра
  #1  
Старый 24.09.2021, 19:50
Аватар для DC
DC DC вне форума
Мембер клуба
 
Регистрация: 10.03.2014
Адрес: Spain
Сообщений: 502
По умолчанию ошибка PCM + Check Engine

Всем привет,
может кто сможет по графикам определить?

Это график 5 минутной поездки. За время поездки 3 раза срабатывали Check Engine + PCM error

Меня смущают скачки на графике Throttle position.. не слишком ли они высокие? по ощущениям, ошибки вылетают в моменты этих скачков на графике. это поездка в 5 минут без прогазовок и рывков, просто прогревочная езда (правда по холмистой дороге).
Есть остальные 60 графиков, которые считывает obd2, могу дополнить
Изображения
  
Ответить с цитированием
  #2  
Старый 24.09.2021, 22:35
Аватар для avolkov
avolkov avolkov вне форума
Мембер клуба
 
Регистрация: 19.12.2011
Адрес: Санкт-Петербург
Сообщений: 304
По умолчанию

Так а какая ошибка-то?
Ответить с цитированием
  #3  
Старый 24.09.2021, 23:11
Аватар для DC
DC DC вне форума
Мембер клуба
 
Регистрация: 10.03.2014
Адрес: Spain
Сообщений: 502
По умолчанию

Цитата:
Сообщение от avolkov Посмотреть сообщение
Так а какая ошибка-то?
misfire по 4-5-6 цилиндрам, а иногда наоборот по 1-2-3
Ответить с цитированием
  #4  
Старый 24.09.2021, 23:14
Аватар для DC
DC DC вне форума
Мембер клуба
 
Регистрация: 10.03.2014
Адрес: Spain
Сообщений: 502
По умолчанию

Цитата:
Сообщение от avolkov Посмотреть сообщение
Так а какая ошибка-то?
Car Scanner ELM OBD2
DTC report
Selected brand: Porsche

============1==============
P0172
Raw code: 0172
ECU: Engine control unit
Status: Pending
OBDII: System too rich, bank 1

============2==============
P0301
Raw code: 0301
ECU: Engine control unit
Status: Pending
OBDII: Cylinder 1 - misfire detected

============3==============
P0302
Raw code: 0302
ECU: Engine control unit
Status: Pending
OBDII: Cylinder 2 - misfire detected

============4==============
P0303
Raw code: 0303
ECU: Engine control unit
Status: Pending
OBDII: Cylinder 3 - misfire detected

============5==============
P0300
Raw code: 0300
ECU: Engine control unit
Status: Pending
OBDII: Random/multiple cylinder(s) - misfire detected

============6==============
P1638
Raw code: 1638
ECU: Engine control unit
Status: Pending
OBDII: Can Link ECM/INSTM Circuit / Network Malfunction

============7==============
P0172
Raw code: 0172
ECU: 01. Engine control unit
Status: Pending fault present during this driving cycle, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: System too rich, bank 1

============8==============
P0301
Raw code: 0301
ECU: 01. Engine control unit
Status: Pending fault present, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Cylinder 1 - misfire detected

============9==============
P0302
Raw code: 0302
ECU: 01. Engine control unit
Status: Pending fault present, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Cylinder 2 - misfire detected

============10==============
P0303
Raw code: 0303
ECU: 01. Engine control unit
Status: Pending fault present, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Cylinder 3 - misfire detected

============11==============
P0300
Raw code: 0300
ECU: 01. Engine control unit
Status: Pending fault present, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Random/multiple cylinder(s) - misfire detected

============12==============
P1638
Raw code: 1638
ECU: 01. Engine control unit
Status: Pending fault present during this driving cycle, Validated and stored in non volatile memory
OBDII: Can Link ECM/INSTM Circuit / Network Malfunction

============13==============
P2800
Raw code: 2800
ECU: 01. Engine control unit
Status: Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory
OBDII: Transmission range (TR) sensor B - PRNDL input

============14==============
B2C12
Raw code: AC12
ECU: 01. Engine control unit
Status: Pending fault present, Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request

============15==============
P1C0B
Raw code: 1C0B
ECU: 01. Engine control unit
Status: Pending fault present

============16==============
C3202
Raw code: 7202
ECU: 01. Engine control unit
Status: Test is inhibited by other DTC, Validated and stored in non volatile memory

============17==============
P0038
Raw code: 0038
ECU: 01. Engine control unit
Status: Pending fault present, Pending fault present during this driving cycle, Test conditions are met, Test is inhibited by other DTC, Validated and stored in non volatile memory, Validated fault has been present during this drive cycle
OBDII: Heated oxygen sensor (HO2S) 2, bank 1, heater control - circuit high

============18==============
C177C
Raw code: 577C
ECU: 01. Engine control unit
Status: Pending fault present during this driving cycle, Test is inhibited by other DTC

============19==============
P0103
Raw code: 0103
ECU: 01. Engine control unit
Status: Pending fault present
OBDII: Mass air flow (MAF) sensor/volume air flow (VAF) sensor - high input

============20==============
P0128
Raw code: 0128
ECU: 01. Engine control unit
OBDII: Coolant thermostat - coolant temperature below thermostat regulating temperature

============21==============
P38C1
Raw code: 38C1
ECU: 01. Engine control unit
Status: Pending fault present during this driving cycle, Test has not been completed

============22==============
P0301
Raw code: 0301
ECU: Engine control unit
Status: Pending
OBDII: Cylinder 1 - misfire detected

============23==============
P0302
Raw code: 0302
ECU: Engine control unit
Status: Pending
OBDII: Cylinder 2 - misfire detected

============24==============
P0303
Raw code: 0303
ECU: Engine control unit
Status: Pending
OBDII: Cylinder 3 - misfire detected

============25==============
P0300
Raw code: 0300
ECU: Engine control unit
Status: Pending
OBDII: Random/multiple cylinder(s) - misfire detected

============26==============
P0301
Raw code: 0301
ECU: 01. Engine control unit
Status: Pending fault present, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Cylinder 1 - misfire detected

============27==============
P0302
Raw code: 0302
ECU: 01. Engine control unit
Status: Pending fault present, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Cylinder 2 - misfire detected

============28==============
P0303
Raw code: 0303
ECU: 01. Engine control unit
Status: Pending fault present, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Cylinder 3 - misfire detected

============29==============
P0300
Raw code: 0300
ECU: 01. Engine control unit
Status: Pending fault present, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Random/multiple cylinder(s) - misfire detected

============30==============
P2800
Raw code: 2800
ECU: 01. Engine control unit
Status: Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory
OBDII: Transmission range (TR) sensor B - PRNDL input

============31==============
U0823
Raw code: C823
ECU: 01. Engine control unit
Status: Pending fault present, Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request

============32==============
P3201
Raw code: 3201
ECU: 01. Engine control unit
Status: Pending fault present, Pending fault present during this driving cycle

============33==============
P0001
Raw code: 0001
ECU: 01. Engine control unit
Status: Test is inhibited by other DTC, Validated and stored in non volatile memory
OBDII: Fuel volume regulator control - open circuit

============34==============
P0038
Raw code: 0038
ECU: 01. Engine control unit
Status: Test is inhibited by other DTC, Validated fault present at time of request, Validated fault has been present during this drive cycle
OBDII: Heated oxygen sensor (HO2S) 2, bank 1, heater control - circuit high

============35==============
P2379
Raw code: 2379
ECU: 01. Engine control unit
Status: Pending fault present during this driving cycle, Test has not been completed, Validated and stored in non volatile memory

============36==============
P0103
Raw code: 0103
ECU: 01. Engine control unit
Status: Pending fault present, Pending fault present during this driving cycle
OBDII: Mass air flow (MAF) sensor/volume air flow (VAF) sensor - high input

============37==============
P0128
Raw code: 0128
ECU: 01. Engine control unit
OBDII: Coolant thermostat - coolant temperature below thermostat regulating temperature

============38==============
P38C8
Raw code: 38C8
ECU: 01. Engine control unit
Status: Pending fault present, Test conditions are met, Test is inhibited by other DTC
Ответить с цитированием
  #5  
Старый 24.09.2021, 23:38
Аватар для avolkov
avolkov avolkov вне форума
Мембер клуба
 
Регистрация: 19.12.2011
Адрес: Санкт-Петербург
Сообщений: 304
По умолчанию

Хороший такой букет, похоже на проблемы соединения с DME, придется ехать к профессионалам.
Ответить с цитированием
  #6  
Старый 24.09.2021, 23:43
Аватар для DC
DC DC вне форума
Мембер клуба
 
Регистрация: 10.03.2014
Адрес: Spain
Сообщений: 502
По умолчанию

Цитата:
Сообщение от avolkov Посмотреть сообщение
Хороший такой букет, похоже на проблемы соединения с DME, придется ехать к профессионалам.
а можно подробнее?

с профессионалами тут тяжко, авто далеко в глуши
Ответить с цитированием
  #7  
Старый 25.09.2021, 10:25
San4es San4es вне форума
Мембер клуба
 
Регистрация: 22.04.2015
Адрес: Воронеж
Сообщений: 122
По умолчанию

Слишком много всего вылезает. Это после стирания кодов и одной поездки?
Мотор атмо или турбо?
Ответить с цитированием
  #8  
Старый 25.09.2021, 11:58
Аватар для DC
DC DC вне форума
Мембер клуба
 
Регистрация: 10.03.2014
Адрес: Spain
Сообщений: 502
По умолчанию

Цитата:
Сообщение от San4es Посмотреть сообщение
Слишком много всего вылезает. Это после стирания кодов и одной поездки?
Мотор атмо или турбо?
мотор турбо

с ошибками я не понимаю логики, что-то стирается сканером, что-то остается
сканер самый простой.. поэтому и задал вопрос про piwis с соседней ветке

а вот коды ошибок, которые вылетали при другой поездке:

Цитата:
Car Scanner ELM OBD2

DTC report



Selected brand: Porsche

============1==============

P0306



Raw code: 0306

Status: Confirmed



OBDII: Cylinder 6 - misfire detected

============2==============

P0304



Raw code: 0304

Status: Confirmed



OBDII: Cylinder 4 - misfire detected

============3==============

P0305



Raw code: 0305

Status: Confirmed



OBDII: Cylinder 5 - misfire detected

============4==============

P0300



Raw code: 0300

Status: Confirmed



OBDII: Random/multiple cylinder(s) - misfire detected

============5==============

P0306



Raw code: 0306

Status: Pending fault present during this driving cycle, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle



OBDII: Cylinder 6 - misfire detected

============6==============

P0304



Raw code: 0304

Status: Pending fault present during this driving cycle, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle



OBDII: Cylinder 4 - misfire detected

============7==============

P0305



Raw code: 0305

Status: Pending fault present during this driving cycle, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle



OBDII: Cylinder 5 - misfire detected

============8==============

P0300



Raw code: 0300

Status: Pending fault present, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle



OBDII: Random/multiple cylinder(s) - misfire detected

============9==============

P2800



Raw code: 2800

Status: Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory



OBDII: Transmission range (TR) sensor B - PRNDL input

============10==============

B198C



Raw code: 998C

Status: Pending fault present, Test conditions are met, Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request

============11==============

P1D03



Raw code: 1D03

Status: Pending fault present, Pending fault present during this driving cycle

============12==============

P0001



Raw code: 0001

Status: Test is inhibited by other DTC, Validated and stored in non volatile memory



OBDII: Fuel volume regulator control - open circuit

============13==============

P0038



Raw code: 0038

Status: Pending fault present, Test is inhibited by other DTC, Test has not been completed, Validated fault has been present during this drive cycle



OBDII: Heated oxygen sensor (HO2S) 2, bank 1, heater control - circuit high

============14==============

B0C7D



Raw code: 8C7D

Status: Pending fault present, Test conditions are met, Test is inhibited by other DTC, Test has not been completed

============15==============

P0303



Raw code: 0303

Status: Pending fault present during this driving cycle, Test conditions are met



OBDII: Cylinder 3 - misfire detected

============16==============

P0128



Raw code: 0128

OBDII: Coolant thermostat - coolant temperature below thermostat regulating temperature

============17==============

P389B



Raw code: 389B

Status: Pending fault present, Pending fault present during this driving cycle, Test has not been completed

============18==============

P0306



Raw code: 0306

Status: Pending



OBDII: Cylinder 6 - misfire detected

============19==============

P0304



Raw code: 0304

Status: Pending



OBDII: Cylinder 4 - misfire detected

============20==============

P0305



Raw code: 0305

Status: Pending



OBDII: Cylinder 5 - misfire detected

============21==============

P0300



Raw code: 0300

Status: Pending



OBDII: Random/multiple cylinder(s) - misfire detected

============22==============

P0306



Raw code: 0306

Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request



OBDII: Cylinder 6 - misfire detected

============23==============

P0304



Raw code: 0304

Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request



OBDII: Cylinder 4 - misfire detected

============24==============

P0305



Raw code: 0305

Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request



OBDII: Cylinder 5 - misfire detected

============25==============

P0300



Raw code: 0300

Status: Pending fault present, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request



OBDII: Random/multiple cylinder(s) - misfire detected

============26==============

P2800



Raw code: 2800

Status: Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory



OBDII: Transmission range (TR) sensor B - PRNDL input

============27==============

B1B13



Raw code: 9B13

Status: Pending fault present, Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request

============28==============

P1C05



Raw code: 1C05

Status: Pending fault present, Pending fault present during this driving cycle

============29==============

P0001



Raw code: 0001

Status: Test is inhibited by other DTC, Validated and stored in non volatile memory



OBDII: Fuel volume regulator control - open circuit

============30==============

P0038



Raw code: 0038

Status: Pending fault present, Pending fault present during this driving cycle, Test is inhibited by other DTC, Test has not been completed, Validated fault has been present during this drive cycle



OBDII: Heated oxygen sensor (HO2S) 2, bank 1, heater control - circuit high

============31==============

P1379



Raw code: 1379

Status: Test conditions are met, Test is inhibited by other DTC, Test has not been completed

============32==============

P0503



Raw code: 0503

Status: Pending fault present during this driving cycle, Test conditions are met



OBDII: Vehicle speed sensor (VSS) - intermittent/erratic/high input

============33==============

P0128



Raw code: 0128

OBDII: Coolant thermostat - coolant temperature below thermostat regulating temperature

============34==============

P389E



Raw code: 389E

Status: Pending fault present, Pending fault present during this driving cycle, Test conditions are met, Test has not been completed
Ответить с цитированием
  #9  
Старый 25.09.2021, 12:23
San4es San4es вне форума
Мембер клуба
 
Регистрация: 22.04.2015
Адрес: Воронеж
Сообщений: 122
По умолчанию

Такое ощущение что протерся жгут на эбу двигателя.
Для начала посмотреть на сколько реальны показания ДТОЖ и ДМРВ, далее
1. Проверить проводку ДВС(заодно прозвонить подогрев задней лямбды, есть ошибка по подогреву, которая должна зажигать чек)
2. Опрессовать впуск
3. Проверить давление топлива
Ответить с цитированием
  #10  
Старый 25.09.2021, 12:44
Аватар для DC
DC DC вне форума
Мембер клуба
 
Регистрация: 10.03.2014
Адрес: Spain
Сообщений: 502
По умолчанию

Цитата:
Сообщение от San4es Посмотреть сообщение
Такое ощущение что протерся жгут на эбу двигателя.
Для начала посмотреть на сколько реальны показания ДТОЖ и ДМРВ, далее
1. Проверить проводку ДВС(заодно прозвонить подогрев задней лямбды, есть ошибка по подогреву, которая должна зажигать чек)
2. Опрессовать впуск
3. Проверить давление топлива
с ОЖ все ок, греется до "стрелка на середину" и там остается.. график датчика ОЖ это подтверждает, никаких скачков и тд. t 86-87 c
ДМРВ меняли на новый.. не исправило. При этом я пробовал его отключать вообще, не помогло тоже
проводку ДВС осматривали в двух сервисах .. насколько компетентно, я не могу сказать.. т.е. эта версия не исключается

по поводу впуска, была версия что дроссель плохой, поставили новый - не исправило
опрессовывать впуск в наших краях не знают/не умеют
я хочу попробовать способ с баллончиком (пшикать и слушать обороты) как думаете?
с другой стороны, если бы был такой сильный подсос воздуха, вылетали бы другие ошибки (?)..
давление топлива не проверяли

интересно что в жару все ошибки уходят и проявляться начинает при понижении до 24-25 и ниже
Ответить с цитированием
  #11  
Старый 25.09.2021, 12:51
Аватар для DC
DC DC вне форума
Мембер клуба
 
Регистрация: 10.03.2014
Адрес: Spain
Сообщений: 502
По умолчанию

по поводу давления топлива
с динамикой у авто полный порядок, разгон и тд - все как обычно

и еще и симптомов, на холодную, при прогреве авто - плавают обороты, иногда сильно
после прогрева стабилизируется
Ответить с цитированием
  #12  
Старый 25.09.2021, 14:00
Аватар для avolkov
avolkov avolkov вне форума
Мембер клуба
 
Регистрация: 19.12.2011
Адрес: Санкт-Петербург
Сообщений: 304
По умолчанию

блин, такой ворох ошибок, что-то явно с проводкой или разъемом. Посмотрите еще раз внимательно, неторопясь. У меня когда-то давно мышь или крыса прикусила одну и кос и долго не могли понять что с машиной.

Можно еще вот здесь тему создать, народу там побольше...
https://rennlist.com/forums/997-turbo-forum-139/
Ответить с цитированием
  #13  
Старый 25.09.2021, 14:13
Аватар для DC
DC DC вне форума
Мембер клуба
 
Регистрация: 10.03.2014
Адрес: Spain
Сообщений: 502
По умолчанию

Цитата:
Сообщение от avolkov Посмотреть сообщение
блин, такой ворох ошибок, что-то явно с проводкой или разъемом. Посмотрите еще раз внимательно, неторопясь. У меня когда-то давно мышь или крыса прикусила одну и кос и долго не могли понять что с машиной.

Можно еще вот здесь тему создать, народу там побольше...
https://rennlist.com/forums/997-turbo-forum-139/
а бывает в природе визуальная схема проводки? слишком там все плотно, нужно знать где именно искать

на реалисте пробовал темы создавать, решение никто не подсказал
Ответить с цитированием
  #14  
Старый 25.09.2021, 14:34
Аватар для avolkov
avolkov avolkov вне форума
Мембер клуба
 
Регистрация: 19.12.2011
Адрес: Санкт-Петербург
Сообщений: 304
По умолчанию

Можно на ютубе посмотреть как двигатели снимают, вопрос проводки должен быть неплохо отражён.

Например
https://youtu.be/FPgxjVJeGr8
Ответить с цитированием
Ответ

Опции темы
Опции просмотра

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход

Суперактуальное
Популярные темы