Цитата:
Сообщение от avolkov
Так а какая ошибка-то?
|
Car Scanner ELM OBD2
DTC report
Selected brand: Porsche
============1==============
P0172
Raw code: 0172
ECU: Engine control unit
Status: Pending
OBDII: System too rich, bank 1
============2==============
P0301
Raw code: 0301
ECU: Engine control unit
Status: Pending
OBDII: Cylinder 1 - misfire detected
============3==============
P0302
Raw code: 0302
ECU: Engine control unit
Status: Pending
OBDII: Cylinder 2 - misfire detected
============4==============
P0303
Raw code: 0303
ECU: Engine control unit
Status: Pending
OBDII: Cylinder 3 - misfire detected
============5==============
P0300
Raw code: 0300
ECU: Engine control unit
Status: Pending
OBDII: Random/multiple cylinder(s) - misfire detected
============6==============
P1638
Raw code: 1638
ECU: Engine control unit
Status: Pending
OBDII: Can Link ECM/INSTM Circuit / Network Malfunction
============7==============
P0172
Raw code: 0172
ECU: 01. Engine control unit
Status: Pending fault present during this driving cycle, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: System too rich, bank 1
============8==============
P0301
Raw code: 0301
ECU: 01. Engine control unit
Status: Pending fault present, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Cylinder 1 - misfire detected
============9==============
P0302
Raw code: 0302
ECU: 01. Engine control unit
Status: Pending fault present, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Cylinder 2 - misfire detected
============10==============
P0303
Raw code: 0303
ECU: 01. Engine control unit
Status: Pending fault present, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Cylinder 3 - misfire detected
============11==============
P0300
Raw code: 0300
ECU: 01. Engine control unit
Status: Pending fault present, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Random/multiple cylinder(s) - misfire detected
============12==============
P1638
Raw code: 1638
ECU: 01. Engine control unit
Status: Pending fault present during this driving cycle, Validated and stored in non volatile memory
OBDII: Can Link ECM/INSTM Circuit / Network Malfunction
============13==============
P2800
Raw code: 2800
ECU: 01. Engine control unit
Status: Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory
OBDII: Transmission range (TR) sensor B - PRNDL input
============14==============
B2C12
Raw code: AC12
ECU: 01. Engine control unit
Status: Pending fault present, Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request
============15==============
P1C0B
Raw code: 1C0B
ECU: 01. Engine control unit
Status: Pending fault present
============16==============
C3202
Raw code: 7202
ECU: 01. Engine control unit
Status: Test is inhibited by other DTC, Validated and stored in non volatile memory
============17==============
P0038
Raw code: 0038
ECU: 01. Engine control unit
Status: Pending fault present, Pending fault present during this driving cycle, Test conditions are met, Test is inhibited by other DTC, Validated and stored in non volatile memory, Validated fault has been present during this drive cycle
OBDII: Heated oxygen sensor (HO2S) 2, bank 1, heater control - circuit high
============18==============
C177C
Raw code: 577C
ECU: 01. Engine control unit
Status: Pending fault present during this driving cycle, Test is inhibited by other DTC
============19==============
P0103
Raw code: 0103
ECU: 01. Engine control unit
Status: Pending fault present
OBDII: Mass air flow (MAF) sensor/volume air flow (VAF) sensor - high input
============20==============
P0128
Raw code: 0128
ECU: 01. Engine control unit
OBDII: Coolant thermostat - coolant temperature below thermostat regulating temperature
============21==============
P38C1
Raw code: 38C1
ECU: 01. Engine control unit
Status: Pending fault present during this driving cycle, Test has not been completed
============22==============
P0301
Raw code: 0301
ECU: Engine control unit
Status: Pending
OBDII: Cylinder 1 - misfire detected
============23==============
P0302
Raw code: 0302
ECU: Engine control unit
Status: Pending
OBDII: Cylinder 2 - misfire detected
============24==============
P0303
Raw code: 0303
ECU: Engine control unit
Status: Pending
OBDII: Cylinder 3 - misfire detected
============25==============
P0300
Raw code: 0300
ECU: Engine control unit
Status: Pending
OBDII: Random/multiple cylinder(s) - misfire detected
============26==============
P0301
Raw code: 0301
ECU: 01. Engine control unit
Status: Pending fault present, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Cylinder 1 - misfire detected
============27==============
P0302
Raw code: 0302
ECU: 01. Engine control unit
Status: Pending fault present, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Cylinder 2 - misfire detected
============28==============
P0303
Raw code: 0303
ECU: 01. Engine control unit
Status: Pending fault present, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Cylinder 3 - misfire detected
============29==============
P0300
Raw code: 0300
ECU: 01. Engine control unit
Status: Pending fault present, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Random/multiple cylinder(s) - misfire detected
============30==============
P2800
Raw code: 2800
ECU: 01. Engine control unit
Status: Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory
OBDII: Transmission range (TR) sensor B - PRNDL input
============31==============
U0823
Raw code: C823
ECU: 01. Engine control unit
Status: Pending fault present, Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request
============32==============
P3201
Raw code: 3201
ECU: 01. Engine control unit
Status: Pending fault present, Pending fault present during this driving cycle
============33==============
P0001
Raw code: 0001
ECU: 01. Engine control unit
Status: Test is inhibited by other DTC, Validated and stored in non volatile memory
OBDII: Fuel volume regulator control - open circuit
============34==============
P0038
Raw code: 0038
ECU: 01. Engine control unit
Status: Test is inhibited by other DTC, Validated fault present at time of request, Validated fault has been present during this drive cycle
OBDII: Heated oxygen sensor (HO2S) 2, bank 1, heater control - circuit high
============35==============
P2379
Raw code: 2379
ECU: 01. Engine control unit
Status: Pending fault present during this driving cycle, Test has not been completed, Validated and stored in non volatile memory
============36==============
P0103
Raw code: 0103
ECU: 01. Engine control unit
Status: Pending fault present, Pending fault present during this driving cycle
OBDII: Mass air flow (MAF) sensor/volume air flow (VAF) sensor - high input
============37==============
P0128
Raw code: 0128
ECU: 01. Engine control unit
OBDII: Coolant thermostat - coolant temperature below thermostat regulating temperature
============38==============
P38C8
Raw code: 38C8
ECU: 01. Engine control unit
Status: Pending fault present, Test conditions are met, Test is inhibited by other DTC