Цитата:
Сообщение от San4es
Слишком много всего вылезает. Это после стирания кодов и одной поездки?
Мотор атмо или турбо?
|
мотор турбо
с ошибками я не понимаю логики, что-то стирается сканером, что-то остается
сканер самый простой.. поэтому и задал вопрос про piwis с соседней ветке
а вот коды ошибок, которые вылетали при другой поездке:
Цитата:
Car Scanner ELM OBD2
DTC report
Selected brand: Porsche
============1==============
P0306
Raw code: 0306
Status: Confirmed
OBDII: Cylinder 6 - misfire detected
============2==============
P0304
Raw code: 0304
Status: Confirmed
OBDII: Cylinder 4 - misfire detected
============3==============
P0305
Raw code: 0305
Status: Confirmed
OBDII: Cylinder 5 - misfire detected
============4==============
P0300
Raw code: 0300
Status: Confirmed
OBDII: Random/multiple cylinder(s) - misfire detected
============5==============
P0306
Raw code: 0306
Status: Pending fault present during this driving cycle, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle
OBDII: Cylinder 6 - misfire detected
============6==============
P0304
Raw code: 0304
Status: Pending fault present during this driving cycle, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle
OBDII: Cylinder 4 - misfire detected
============7==============
P0305
Raw code: 0305
Status: Pending fault present during this driving cycle, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle
OBDII: Cylinder 5 - misfire detected
============8==============
P0300
Raw code: 0300
Status: Pending fault present, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle
OBDII: Random/multiple cylinder(s) - misfire detected
============9==============
P2800
Raw code: 2800
Status: Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory
OBDII: Transmission range (TR) sensor B - PRNDL input
============10==============
B198C
Raw code: 998C
Status: Pending fault present, Test conditions are met, Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request
============11==============
P1D03
Raw code: 1D03
Status: Pending fault present, Pending fault present during this driving cycle
============12==============
P0001
Raw code: 0001
Status: Test is inhibited by other DTC, Validated and stored in non volatile memory
OBDII: Fuel volume regulator control - open circuit
============13==============
P0038
Raw code: 0038
Status: Pending fault present, Test is inhibited by other DTC, Test has not been completed, Validated fault has been present during this drive cycle
OBDII: Heated oxygen sensor (HO2S) 2, bank 1, heater control - circuit high
============14==============
B0C7D
Raw code: 8C7D
Status: Pending fault present, Test conditions are met, Test is inhibited by other DTC, Test has not been completed
============15==============
P0303
Raw code: 0303
Status: Pending fault present during this driving cycle, Test conditions are met
OBDII: Cylinder 3 - misfire detected
============16==============
P0128
Raw code: 0128
OBDII: Coolant thermostat - coolant temperature below thermostat regulating temperature
============17==============
P389B
Raw code: 389B
Status: Pending fault present, Pending fault present during this driving cycle, Test has not been completed
============18==============
P0306
Raw code: 0306
Status: Pending
OBDII: Cylinder 6 - misfire detected
============19==============
P0304
Raw code: 0304
Status: Pending
OBDII: Cylinder 4 - misfire detected
============20==============
P0305
Raw code: 0305
Status: Pending
OBDII: Cylinder 5 - misfire detected
============21==============
P0300
Raw code: 0300
Status: Pending
OBDII: Random/multiple cylinder(s) - misfire detected
============22==============
P0306
Raw code: 0306
Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Cylinder 6 - misfire detected
============23==============
P0304
Raw code: 0304
Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Cylinder 4 - misfire detected
============24==============
P0305
Raw code: 0305
Status: Test conditions are met, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Cylinder 5 - misfire detected
============25==============
P0300
Raw code: 0300
Status: Pending fault present, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request
OBDII: Random/multiple cylinder(s) - misfire detected
============26==============
P2800
Raw code: 2800
Status: Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory
OBDII: Transmission range (TR) sensor B - PRNDL input
============27==============
B1B13
Raw code: 9B13
Status: Pending fault present, Test is inhibited by other DTC, Test has not been completed, Validated and stored in non volatile memory, Validated fault present at time of request
============28==============
P1C05
Raw code: 1C05
Status: Pending fault present, Pending fault present during this driving cycle
============29==============
P0001
Raw code: 0001
Status: Test is inhibited by other DTC, Validated and stored in non volatile memory
OBDII: Fuel volume regulator control - open circuit
============30==============
P0038
Raw code: 0038
Status: Pending fault present, Pending fault present during this driving cycle, Test is inhibited by other DTC, Test has not been completed, Validated fault has been present during this drive cycle
OBDII: Heated oxygen sensor (HO2S) 2, bank 1, heater control - circuit high
============31==============
P1379
Raw code: 1379
Status: Test conditions are met, Test is inhibited by other DTC, Test has not been completed
============32==============
P0503
Raw code: 0503
Status: Pending fault present during this driving cycle, Test conditions are met
OBDII: Vehicle speed sensor (VSS) - intermittent/erratic/high input
============33==============
P0128
Raw code: 0128
OBDII: Coolant thermostat - coolant temperature below thermostat regulating temperature
============34==============
P389E
Raw code: 389E
Status: Pending fault present, Pending fault present during this driving cycle, Test conditions are met, Test has not been completed
|
|